Filton

Rotary Unions, Swivel Joints, Air Breather Filters, Flexible Hoses

REB_Parts_1000X300

Maintenance and Overhaul

  • Remove nuts (13) and washers which allows for the removal of adaptor (4).
  • Remove bellows subassembly and gasket of seal kit (5).
  • Remove locking screw (7) and unscrew locking ring (14 - RH Thread) and extract spindle (15) complete with ball bearings, etc.
  • Remove locking screws from the rubbing ring of seal kit (5), unscrew the rubbing ring (RH or LH thread) and remove gasket.
  • Thoroughly clean the ball bearing kit (11), check the condition of the bearings and re-grease. If there is any doubt about the condition, replace the bearing kit and pre-pack with an approved grease.
  • To replace the bearing kit (11), remove locking screws (8), bearing locking ring (9 - RH or LH Thread) and Nilos ring (10). Press off the bearing kit.
  • If the adaptor (4) is Type R.S., remove locking screw (3), unscrew locking ring (1 - RH Thread) and remove C/T bearing (2).
  • Thoroughly clean all parts before reassembly (which is virtually the reverse of the above steps).
  • Replace seal kit (5), bearing kit (11) and if type RS, C/T bearing (2). Handle seal kits with care to avoid damaging the precision lapped seal faces.
  • Thoroughly clean all parts before reassembly (which is virtually the reverse of the above steps).
  • After reassembly, follow the recommended installation procedures and allow for a suitable run-in period to ensure the seals are working correctly before refitting to the machine.

* Note: For the 125 (5”) and 150 (6”) models, there is a screwed
adjusting ring on the flanged end of the body which is locked with a screw and can be adjusted to give 6mm compression on the bellows subassembly if necessary.

NameModelLeft or RightNominal SizeNominal Size in InchesStylehf:att:pa_modelhf:att:pa_left-or-righthf:att:pa_nominal-sizehf:att:pa_nominal-size-incheshf:att:pa_style
17238-Lreb-unionl502s-t
17238-Rreb-unionr502s-t
17238G-Lreb-unionl502s-t
17238G-Rreb-unionr502s-t
17263-Lreb-unionl803r-s
17263-Rreb-unionr803r-s
17263G-Rreb-unionr803r-s
17265-Lreb-unionl803b-e
17265-Rreb-unionr803b-e
17266-Lreb-unionl803s-t
17266-Rreb-unionr803s-t
17350-Lreb-unionl502b-e
17350-Rreb-unionr502b-e
17350G-Lreb-unionl502b-e
17350G-Rreb-unionr502b-e
17351-Lreb-unionl502r-s
17351-Rreb-unionr502r-s
17351G-Rreb-unionr502r-s
17421-Lreb-unionl903-1-2b-e
17421-Rreb-unionr903-1-2b-e
17422-Lreb-unionl903-1-2s-t
17422-Rreb-unionr903-1-2s-t
17423-Lreb-unionl903-1-2r-s
17423-Rreb-unionr903-1-2r-s
17424-Lreb-unionl1004b-e
17424-Rreb-unionr1004b-e
17425-Lreb-unionl1004s-t
17425-Rreb-unionr1004s-t
18104-Lreb-unionl401-1-2b-e
18104-Rreb-unionr401-1-2b-e
18104G-Lreb-unionl401-1-2b-e
18104G-Rreb-unionr401-1-2b-e
18105-Lreb-unionl401-1-2s-t
18105-Rreb-unionr401-1-2s-t
18105G-Lreb-unionl401-1-2s-t
18105G-Rreb-unionr401-1-2s-t
18106-Lreb-unionl401-1-2r-s
18106-Rreb-unionr401-1-2r-s
18106G-Lreb-unionl401-1-2r-s
18106G-Rreb-unionr401-1-2r-s
18131-Lreb-unionl652-1-2b-e
18131-Rreb-unionr652-1-2b-e
18131G-Lreb-unionl652-1-2b-e
18132-Lreb-unionl652-1-2s-t
18132-Rreb-unionr652-1-2s-t
18133-Lreb-unionl652-1-2r-s
18133-Rreb-unionr652-1-2r-s
18133G-Rreb-unionr652-1-2r-s

Scroll to Top